| Torch and Regulator Repair |
| We offer a full line of parts for most brands of torches and regulators. Call us at 405-232-4799, with the make and model of your item, tell us what it's doing and we can tell you what you need to fix it. DON'T want to repair it yourself? Then send it to us. Your torch or regulator will be cleaned, repaired and on its way back to you usually within 5 business days. And we will pay the shipping charges to return it to you (up to 10 pounds) . We ship UPS standard ground. Never use ANY oil products on or around your regulators. This includes: Pipe Dope WD-40 Liquid Wrench For lubrication or leak detection use Dawn dish soap. |
 | |  | |  | |  | |  | |  | |  | |  |
| Made and serviced in the USA. If they were all made this good, I'd be out of a job. |
| We DO NOT sell new equipment. We specialize in service, repair and parts. |
| CONTACT INFO |
| mailing address: 2006 Southwest 15th Street Okc, Ok 73108 Phone: 405-232-4799 Fax: 405-232-5264 Parts and service : KSellon@billswelderrepair.com |
| MFG LINKS |
| Please provide us with the following information when asking a question: ** Make and model of torch or regulator |
| Copyright 2007 Bill's Welding Equipment Repair All rights reserved Rev May 10,2007 |
| All torches and regulators are bead blasted and buffed prior to repair. Once repaired your equipment will look and work like new. The following pictures show a Victor 1350 cutting attachment having new tubes installed to add 3 inches to the length of the attachment. |
| Pictured to the left is a standard Victor 1350 cutting attachment |
| Using the same 'head', new longer tubes are silver soldered in place. |
| Victor 1350 with 3" longer tubes installed. |
| Victor Equipment makes a BHA (beveling head attachment) It attaches to the head of your torch and your tip and nut go on the end of it. It has a scale on the side so you are able to make cuts at any angle. It is shown here on a mchine torch, but can be used on any Journeyman size Victor torch |
| Victor SR450/460 rebuild kit $19.99 (oxygen regulator parts shown) |
| Kit with gauges $32.00 |
| gauges 2.5" gauges $6.50 2" gauges $5.60 |