| Pre-Owned & New Equipment |
| E-Mail Service: BSellon@billswelderrepair.com or Parts: KSellon@billswelderrepair.com |
| The following equipment is listed as a convenience to our customers. None of this equipment is owned by us. |
| Copyright 2007/2008 Bill's Welding Equipment Repair All rights reserved Rev April 24, 2008 |


| THUNDERBOLT AC/DC Comes with leads. 460 INPUT ONLY (can not be changed) $350.00 Kaye 405-232-4799 |
| Certified Machine & Design, Inc 3000# Manufacturing Positioner - Full 3000 pound capacity @ 16” from Pivot, more than other brands - 0 to 135 degree power tilt, direct drive double reduction gear box, oversize 0.75 horsepower TEFC 115 volt motor limit switch protected - 0 to 2 rpm infinitely variable speed gear drive table, double reduction gear box, over size 0.75 horsepower TEFC 90 volt DC motor - Full Tapered bearing support of table with ground cable to main axle - NEMA 4 box and sealed switches - ideal for dirty environments - Standard 42” diameter 5/8” flat table, available square and/or slotted - Standard 18 foot remote on-off foot switch with safety cover - Optional fiberglass remote pendant with complete remote functions for Tilt-Flat, Forward-Reverse, Run-Jog, Infinite Speed and Emergency stop - Optional drive speeds available for up to 5 rpm - Optional height adjustable centerline 30” to 42” above floor - All top quality components available from a variety of sources – Baldor DC motors, Dayton AC motors, KB speed controls, Telemecanique switches, all circuits fuse protected, remotes are shielded for AC welding operations - Solid steel construction of laser cut plate and structural steel components with powder coat finish with zinc plated features Lead time is 3 weeks. $16,500.00 Call Jerry for details 405-613-8188 |



| Miller Electric Roughneck $800.00 Call Steve 605-277-4854 |
| LINCOLN SAE 400 CODE#10601 SN:U1001011927 hrs: 2850 $7500 405-932-5586 Charles Allen MILLER TRAILBLAZER 44G COMPLETELY RESTORED 200hours AGO 918-290-0767 JOHNNY LINCOLN SAM 400 $3000 CARL 918-906-7979 |


| 98 Classic 3D code#10072 Hrs: 6k Complete Rig Set up 06 Chevy Duramax XC Allison 6 spd 4x4 Miles: 30,000 $40,000 Machine only $6500 |

| LEAD REELS HOLD 150' OF #1 LEAD $150.00 here is a link to the listing on Ebay: http://myworld.ebay.com/telcomgroup/ |


| 2001 CLASSIC 2 AIR COOLED DUETZ $5500.00 Stephen Dove 405-388-4616 |
| 1946/1956 SHORTHOOD COMPLETELY REBUILT AND UPDATED. $8500.00 itemized invoice will be provided with this machine all parts covered by 1 year warranty unless otherwise stated. Jason Wingert 972-679-7863 |


| COMPLETE ENGINE OVERHAUL, REBUILT MAGNETO, SAFETY GAUGES, NEW SHUNT FIELD COILS, NEW EXCITER ARMATURE, OEM IDLER UPGRADE, NEW ALTERNATOR, REBUILT STARTER, RECORE RADIATOR, NEW ROOF. NEW HARDWARE AND WIRING, AND MUCH MORE. |

| CALL JOHN KINCADE 918-271-0921 |